How to Connect Two Routers Together to Boost Your Wi-Fi

We all know that Wi-Fi can be patchy at times and not the most reliable. Fortunately, there are a couple of ways to get around this: add a Wi-Fi extender or reposition old hardware. You probably have an old router lying in your closet somewhere, and while you can throw it away, you can use it as a Wi-Fi extender instead. It will save you a few dollars and give better performance than a Wi-Fi extender.

While the Wi-Fi extender’s setup is simple, its simplicity comes at a cost – performance. One way to solve the problem is to reduce latency and add another router to the network.


What are the benefits of connecting two routers?

While it’s often easier to add a Wi-Fi extender, the results from adding another router speak for themselves. In terms of performance, adding another router to an existing router is better than any Wi-Fi extender, since it’s hardwired over an Ethernet connection.

While a Wi-Fi extender receives packets from your router and retransmits them into a signal that your devices can use, the performance of a wired over wireless connection is unmatched, further proving it. demonstrate this simple trick. A successful installation will involve recycling old electronics and boosting your Wi-Fi signal, and here’s how you do it.

To complete this installation, you will need a few sections and access to a few things. Fortunately, you probably own most of these in your household. Otherwise, just about any department store should have these in stock.

MAKE A VIDEO OF THE DAY
  • Main router
  • Second router
  • Ethernet cable (with desired length)
  • Access to the computer
  • Internet connection

Ethernet cables are only effective over a certain distance and can only deliver up to certain speeds. This depends on the length of the Ethernet cable and what type of cable it is, from Cat 1 to Cat 8.

How to access your main router

Your main router is where most of the setup takes place and allows the secondary router to receive internet connections from the main router. Regardless of the router model or brand you have, you must log in to your router’s setup page.

Type the router’s IP address into the browser’s address bar and press Enter. Not sure what your router’s IP address is? Learn how to find your router’s IP address, then come back to this article. Regardless of the operating system, your router’s IP address will remain the same when your Internet Service Provider issues the IP address.


For example, to find your router’s IP address on Windows:

  1. Input Network Status in the Start menu search bar and select Best.
  2. Next, choose View hardware and connection properties.
  3. Locate Default Gatewayalong with that you will find the IP address of your router.

The workaround is to log into your carrier’s website and change your settings this way. Entering the default gateway IP address into your browser will also take you to your service provider’s website, where you can achieve the same things. Regardless of your configuration, a few things need to be set up for this system to work properly.

Set up the main router

In order for your secondary router to work as an extender, you have to set up a few things on the main router for it to work. After entering the default gateway IP into your browser, the screen will prompt you to enter your username and password. Usually, this remains the default, and logging in can be as simple as typing “admin” for the password prompt. Regardless of whether this is your first time logging in, the default router information can be found online or in the owner’s manual.


As mentioned, entering the default gateway IP address will usually take you to your carrier’s Services page, allowing you to do similar things. You won’t sign in with the default credentials, because you’ve already set something up with your existing service provider.

Then click DHCP server check box on your main router, although this will be enabled by default. This completes the installation on the main router side of things. Route the Ethernet cable if needed behind furniture, under carpet, or through drywall to the desired location of your secondary router, but don’t connect the two yet.

Set up secondary router

The first half of the installation is complete, leaving you with the second half. However, before accessing the internet on the secondary router, you must connect to the secondary router to set everything up properly. Similar to the previous steps, you can do this by plugging one end of the Ethernet cable into your computer and the other into the secondary router. Then follow the same steps as the main router, locate where it says DHCP server in router settings. This must be disabled on the secondary router to prevent IP address problems.


After unchecking the DCHP Server check box on your secondary router, disconnect the Ethernet cable from the secondary router from your computer and perform a system reboot on both networks. Start by connecting your main network first and verify that it is fully operational.

Locate the Ethernet cable from the primary router, then place the secondary router in the desired location. Ideally, this should be located where the internet is patched or doesn’t have much signal. The Ethernet cable from the main router must plug into the Ethernet port on the secondary router, allowing it to receive an internet connection from your main router.

Check your Internet connection

At this point in the installation, you should be able to connect to both routers as separate entities, both wirelessly and over the WLAN. This will be more efficient than using a Wi-Fi extender, because of the reduced latency and simple dominance of the wired connection over its counterpart.

If the secondary router is not working, double check your settings and proceed to reboot the system. You can do this by disconnecting the power to the devices for about 30 seconds. When fully operational, both routers will emit a Wi-Fi signal even in the weakest spots from before!


smartphone-slow internet

What is my bandwidth usage? 5 tips to monitor home network usage

Continue reading


About the author

https://www.makeuseof.com/how-connect-two-routers-together/ How to Connect Two Routers Together to Boost Your Wi-Fi

Sarah Ridley

USTimesPost.com is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – admin@ustimespost.com. The content will be deleted within 24 hours.

Related Articles

Back to top button